[email protected] +86 18100321580

Our main products include aluminum coil, aluminum sheet, aluminum circle, embossed aluminum plate, aluminum tread plate, aluminum foil etc. If you are interested in our products, you can contact with us demand table submission.

Maximum specification of honeycomb aluminum coil

Aluminum Honeycomb Panels - Grand View

The honeycomb core is laminated with a front and back surface skin consisting of standard 0.5mm or optional 0.8mm, 1.00mm thickness coated coil aluminum. Alternative surface skin materials are available including stainless steel, galvanized iron, and other non-ferrous materials. The core cell size and surface can be selected by the

Honeycomb DataSheet |

View all our Honeycomb Data Sheets. Flex-Core Formable Aluminum Datasheet #: 2700 CR III 5052 5056 Corrosion Resistant Specification Grade Aluminum Datasheet #: 2100 US Version. Produc CR-PAA CR-PAA Phosphoric Acid Anodized Aluminum Datasheet #: 2900 US Version. Produc RIGICELL

Aluminum Honeycomb Panels |

3003 Aluminum Honeycomb Panels. Yield Strength: Not Rated. Hardness: Not Rated. Temper: Not Rated. A honeycomb core is bonded between two aluminum sheets for rigidity. These panels offer a higher strength-to-weight ratio than solid sheets, so they\'re often used as a

Xintai Aluminum Manufacturer Aluminum Honeycomb

Front side: aluminum coil coated with PVDF or polyester. Core: low density, nontoxic polyethylene. Rear side: aluminum coated with polyester . 3. Specifications: Panel thickness: 2 to 6mm Aluminum skin thickness: 0.04 to 0.5mm(or customized) Width: Standard width: 1,220mm Maximum width: 1500mm. Other widths available upon request. Length: Standard:

SECTION 13 ALUMINUM HONEYCOMB PANEL

UNA-CLAD Series 10 Aluminum Page 5 of 7 B. Aluminum face sheets 1. Thickness: 0.040\" for coil coated or coil anodized finish [0.063\" for spray painted or batch anodized finish]. C. Tolerances 1. Panel bow shall be a maximum 0.5 percent of panel dimension in width and length. 2. Panel dimension shall allow for field adjustments, as recommended

Technical Data Of Aluminium Honeycomb Panels - Aluminum

The PVDF (i.e. fluorocarbon) coating is applied to the aluminum coil prior to lamination into a honeycomb panel, using a continuous coil coating process system imported from Korea. The multiple layers are individually stove at temperature between 200 ℃ to 260 ℃. The quality of coating is tested according to standards established by ASTM

Honeycomb Aluminum Plate Sheet For Shipbuilding

Aluminum panel containing 98% aluminum, 1% mg, doped with other small amounts of iron and silicon, after H19 ultra cold hardening treatment, the yield strength reached 175Mpa, composite American Standard QQ-A-250/26 and British standard BS1470. 3003 type aluminum honeycomb material in a variety of sizes, so that the sandwich structure of

Aluminum 5052 Honeycomb- Aluminum/Al Foil,plate/sheet

Aluminum Honeycomb Core. HongZan manufactures a wide series of aluminum honeycomb core, from aluminum 3003 or 5005, 5052. Chat Now Send Inquiry; Aluminum Honeycomb: Core Composites. Aluminum honeycomb offers maximum stiffness and one of the highest strength to weight ratios of any structural core material available. The foil is cleaned and

Aluminum Honeycomb Sandwich Panels For High Speed

Aluminum panel containing 98% aluminum, 1% mg, doped with other small amounts of iron and silicon, after H19 ultra cold hardening treatment, the yield strength reached 175Mpa, composite American Standard QQ-A-250/26 and British standard BS1470. 3003 type aluminum honeycomb material in a variety of sizes, so that the sandwich structure of

QuadroClad™ Metal Façade Panels / Hunter Douglas Contract

Mar 12, 2010  Specifications. External Skin: Aluminum coil-coated with Luxacote® or PVF2 finish (0.95 mm/0.037 in).Other base metals and finishes available. Internal Skin: Aluminum coil

Honeycomb Aluminum Coil 1.5 Cm Thick Price Wholesalers

Last Login Date: Sep 23, 2021 Business Type: Manufacturer/Factory Main Products: Aluminum Composite, Aluminum Honeycomb, Color Coated Aluminium Coil, Zinc Composite, Aluminium, Ahp, Pre Painted Aluminum Coil, Metal Composite, Acm, Zinc Honeycomb

10mm Aluminum Honeycomb Panel Build A Pontoon

Jan 07, 2021  10mm Aluminum Honeycomb Panel Build a Pontoon Houseboat, Find details about Aluminum Honeycomb Plate, Porcelain Honeycomb Panel from 10mm Aluminum Honeycomb Panel Build a Pontoon Houseboat - FOSHAN CANYI METAL COMPANY LIMITED Specification. Customizable size. Origin. . HS Code. Aluminum Coil, Aluminum, Air

QuadroClad Overview

coil-coated aluminum. Layers are bonded together with high-quality adhesives to form a monolithic mechanical construction. The resul Optimal quality control. Maximum flexibility. The ability to withstand the most severe environmental conditions. SPECIFICATIONS External skin. . . . . . . . . Aluminum coil-coated with Luxacote® or PVF2

Hex Honeycomb Attributes And

Aluminum honeycomb is available in four different alloys,aerospace grades 5052 and 5056,and commercial grades 3104 and 3003. 5052 Alloy Specification grade honeycomb in the 5052 H39 aluminum alloy is available for general purpose applications,in a very wide range of cell size/density combinations in the hexagonal and

SPECIFICATION FOR APPROVAL - Parts

SPECIFICATION: 145 mm ( 5”) 6 ohms 50 W RMS (100 W Max) 57.15 Hz CCAW 87.41 dB 2.83V/1m 57 to 3500 Hz 8 V 1060 grams (2.33 lbs) 50 W, 8H , EIA white noise VOICE COIL: Diameter Winding Length Layer Former material 75.5 10.9 2 Aluminum Copper clad Aluminum (mm) (mm) ASV CONE: SURROUND: Glass fiber ( honeycomb layer of sandwiches structure cone

Outdoor Building 4mm PVDF Aluminum Composite Wall

Aluminum composite panel,perforated aluminum panel,Aluminum honeycomb panel, Aluminum core panel 1, 000 TEU/year. Our factory is located in province, covering an area of 70, 0000 square meters and 6 standard workshops, equipped with 10 production lines, annual output is about 600,0000 sqm, annual export is more than 1, 000

SINCO MATERIAL SPECIFICATION SINCO- CORRUGATED

SINCO MATERIAL SPECIFICATION - - 1 - - SINCO- CORRUGATED ALUMINIUM CORE PANELS Q-NAP Sinco is the Brand Name of Aluminum Composite Panels manufactured in Qatar by Qatar National Aluminum Panel Co. (Q-NAP) P.O. Box:37809 Doha – Qatar, our registered office is situated at New Industrial Area, Pink Zone, Doha, : + 4430, : +974

Honeycomb Panels Colour Coated Aluminum Sheet

As one of the most professional honeycomb panels colour coated aluminum sheet manufacturers and suppliers in , we\'re featured by quality products and good service. Please rest assured to buy or wholesale bulk honeycomb panels colour coated aluminum sheet at competitive price from our

Precision Coils - Coil

Condensing Coils (3/8\" Coils) - 600 psig / 300° F Condensing Coils (1/2\" 5/8\" Coils) - 300 psig / 300° F. Fins Coils shall be plate fin type construction providing uniform support for all coil tubes. Coils are to be manufactured with die-formed aluminum or copper fins with self spacing collars which compley cover the entire tube

Super Thin Aluminium Honeycomb Panels In Fireproof

Super Thin Aluminium Honeycomb Panels in Fireproof A2 Ahp for Exterior Wall Cladding, Find details about Aluminium Composite Panels, Building Materials from Super Thin Aluminium Honeycomb Panels in Fireproof A2 Ahp for Exterior Wall Cladding - Willstrong New

Aluminum Honeycomb/Aluminum On Aluminum Panels, View

Front side: aluminum coil coated with PVDF or polyester. Core: low density, nontoxic polyethylene. Rear side: aluminum coated with polyester . 3. Specifications: Panel thickness: 2 to 6mm Aluminum skin thickness: 0.04 to 0.5mm(or customized) Width: Standard width: 1,220mm Maximum width: 1500mm. Other widths available upon request. Length

Signage Material / Outdoor Sign Board Material/acp/acm

1. We are manufacture and supplier of aluminum composite panel in with over 18 years\'s experience. 2.We keep fastest delivery. Cause our location is near all raw materials suppliers. 3. Best price could be offered as we have professional long term reliable parterner alumimium coil

SPECIFICATION FOR APPROVAL - Parts

SPECIFICATION: 145 mm ( 5”) 6 ohms 50 W RMS (100 W Max) 57.15 Hz CCAW 87.41 dB 2.83V/1m 57 to 3500 Hz 8 V 1060 grams (2.33 lbs) 50 W, 8H , EIA white noise VOICE COIL: Diameter Winding Length Layer Former material 75.5 10.9 2 Aluminum Copper clad Aluminum (mm) (mm) ASV CONE: SURROUND: Glass fiber ( honeycomb layer of sandwiches structure cone

Aluminium: Specifications, Properties, Classifications And

May 17, 2005  Aluminium is the world¡¯s most abundant metal. The versatility of aluminium makes it the most widely used metal after steel. The specifications, properties, classifications and class details are provided for aluminium and aluminium

Aluminum Solid Panel Supplier,Wholesale - Alubang

The base plate adopts the high-quality and high-strength aluminum alloy plate whose thickness includes different specifications like 2.0mm, 2.5mm, 3.0mm and 4.0mm. It mainly consists of such parts as panel, strengthening rib and decoder. The maximum size of the finished work piece can reach 8000mm ×

SECTION 13 ALUMINUM HONEYCOMB PANEL

UNA-CLAD Series 10 Aluminum Page 5 of 7 B. Aluminum face sheets 1. Thickness: 0.040\" for coil coated or coil anodized finish [0.063\" for spray painted or batch anodized finish]. C. Tolerances 1. Panel bow shall be a maximum 0.5 percent of panel dimension in width and length. 2. Panel dimension shall allow for field adjustments, as recommended

Technical Data Of Aluminium Honeycomb Panels - Aluminum

The PVDF (i.e. fluorocarbon) coating is applied to the aluminum coil prior to lamination into a honeycomb panel, using a continuous coil coating process system imported from Korea. The multiple layers are individually stove at temperature between 200 ℃ to 260 ℃. The quality of coating is tested according to standards established by ASTM

Aluminum Honeycomb Panel For Exterior Wall Cladding

Honeycomb, Aluminum Panel, Wall Cladding manufacturer / supplier in , offering Aluminum Honeycomb Panel for Exterior Wall Cladding (A2), PMMA Mirror Acrylic for Inside Decoration Safe Mirror Unbroken Mirror Plastic Mirror, Pure Aluminum Panel PVDF Coating Accp A2

SINCO MATERIAL SPECIFICATION SINCO- CORRUGATED

SINCO MATERIAL SPECIFICATION - - 1 - - SINCO- CORRUGATED ALUMINIUM CORE PANELS Q-NAP Sinco is the Brand Name of Aluminum Composite Panels manufactured in Qatar by Qatar National Aluminum Panel Co. (Q-NAP) P.O. Box:37809 Doha – Qatar, our registered office is situated at New Industrial Area, Pink Zone, Doha, : + 4430, : +974

Specification Properties | RBTCH - Aluminum Honeycomb

Specification of Aluminum Honeycomb Core. Core lateral length: 3、4、5、6、7.5、8、10、12、15mm Foil width : 0.040.08mm Aluminum foil: Type 3003 and 5052 Maximum width: 1650mm, lengths depending on lateral length arrangements detailed as

Aluminum Honeycomb Plate,Aluminum Composite Panel

Jixiang is aluminum honeycomb plate manufacturer, honeycomb plate consists of two layers of aluminium alloy plates. 3003H24 aluminium alloy and 5052AH14 high manganese alloy are used to make faceplates. Faceplate thickness ranges from 0.8mm to 1.5mm. Aluminium foil is used for composing honeycombs. Our aluminium honeycomb plates is of light weight, high intensity and high rigidity

What Is Aluminum Honeycomb Core Specification - Cookofo

Specification:Al foil series: A3003,A5052Side length:0.5mm17.33 mmFoil thickness 0.04mm0.2 mmCell size:0. mm30.0

Inquiry

For all inquiries, please fill in the form below (Name/Email/Message are required) to send us a brief message, and we will get back to you as soon as possible.

CBD, ZHENGHZOU, HENAN CHINA

+86 18100321580

Your message has been sent. Thank you!