[email protected] +86 18100321580

Our main products include aluminum coil, aluminum sheet, aluminum circle, embossed aluminum plate, aluminum tread plate, aluminum foil etc. If you are interested in our products, you can contact with us demand table submission.

1.5 Thick patterned aluminum coil

Aluminum Stucco Embossed

Thickness : 0.3 1.5 mm; Width : 1,000 1,250 mm; Length : Coiled, or 2,000 4,000 mm *It is usually supplied in coil with trimmed edge. In very few cases, it also can be cut to length when the thickness is over 0.5mm and the length is not exceeding

Precision Coils - Coil Dimension

Fin heights are dictated by our tube patterns • For 5/8\" tube coils, fin heights are available in increments of 1.5” • For 1/2\" tube coils, fin heights are available in increments of 1.25” • For 3/8\" tube coils fins are available in 1.00\" increments. FL – Fin Length Maximum fin length is 250

Five Bar Mill Finish Aluminum Chequered Plate, Thickness

Talco Aluminium Company - Offering Five Bar Mill Finish Aluminum Chequered Plate, Thickness: 1.5-3.25 Mm at Rs 210/kg in Chennai, Tamil Nadu. Read about company. Get contact details and address |

Cold Hot Rolled Different Pattern Surfacement Aluminum

Cold Hot Rolled Different Pattern Surfacement Aluminum Coil/Sheet, Find details about Aluminium Extrusion, Stainless Steel from Cold Hot Rolled Different Pattern Surfacement Aluminum Coil/Sheet - Xinyu Non-ferrous Metals

Round Hole Perforated Aluminum And Metal

Round Hole Perforated / Slotted Metal Sheet is the most solid metal material compared with diamond, square or other perforations. It is also the most popular metal sheet choice for engineering and decoration uses.Round Hole Perforated Mesh is produced with an arrangement of holes in straight line or 60 degree staggered pattern is standard, and variations include 45 degree

Aluminum Sheet - Sino Aluminum Ltd.Aluminum

Sino Aluminum Ltd., with registered capital of USD 30,000,000, specializes in saling and manufacturing of Stainless Steel, is a large-scale shareholding steel

United Aluminum | Aerospace Aluminum

United Aluminum can offer Custom Rolled® Aluminum Coil Strip in these alloys to meet your requirements. 6061, 7075, 2024 Chemical Composition Chemical Composition Limits for Aluminum Alloys. Composition in percent by weight according to The Aluminum Association. The values associates maximum limits unless shown as a range or a

Embossed Aluminum Coil Pattern Price Wholesalers

Alumet Supply is a metal service center specializing in aluminum sheet and coil. We specialize in painted, anodized and mill finish aluminum. Alumet Supply offers cut-to-length, slitting, blanking and shearing. We provide custom colors and custom sizes. We also have our own brand of ACM panels, called

Coil-Threaded Rods |

Thick. Material: Tensile Strength: Number o Dia. Ctr.-to-Ctr. Mounting Fasteners Included : Each: 1/2 \"-6: Right Hand: 1 3/16 \" 1 5/8 \" 4\" 9/32 \" Iron: Not Rated: 4: 5/16 \" 2 1/16 \" No:0000:0: 3/4 \"-4 1/2: Right Hand: 1 3/16 \" 1 5/8 \" 4\" 9/32 \" Iron: Not Rated: 4: 5/16 \" 2 1/16 \" No:0000:

MetalsDepot® - 3003, 5052, 6061 Aluminum

3003-H14 Aluminum Plate - (ASTM B209, QQ-A-250/2) Excellent weldability and formability, with good corrosion resistance makes 3003 Aluminum Plate a popular and economical choice. 3003 Aluminum Plate has a smooth, shiny finish and is popular for many cosmetic and industrial applications, including: decorative trim, fuel tanks, food chemical handling, trailer siding roofing,

Residential Carrier Fan Coil Units 1.5 To 3 Ton | Carrier

1.5 - 3 Ton Residential Fan Coil Variable Speed Multipoise (Aluminum Coil) Item: MFR:

Aluminum Sheet - Sino Aluminum Ltd.Aluminum

Sino Aluminum Ltd., with registered capital of USD 30,000,000, specializes in saling and manufacturing of Stainless Steel, is a large-scale shareholding steel

Five Bar Mill Finish Aluminum Chequered Plate, Thickness

Talco Aluminium Company - Offering Five Bar Mill Finish Aluminum Chequered Plate, Thickness: 1.5-3.25 Mm at Rs 210/kg in Chennai, Tamil Nadu. Read about company. Get contact details and address |

Cold Hot Rolled Different Pattern Surfacement Aluminum

Cold Hot Rolled Different Pattern Surfacement Aluminum Coil/Sheet, Find details about Aluminium Extrusion, Stainless Steel from Cold Hot Rolled Different Pattern Surfacement Aluminum Coil/Sheet - Xinyu Non-ferrous Metals

REFRIGERANT EVAPORATOR COIL

utilizing a 1.5” equilateral tube pattern; Flat, Rippled and “Hi -F” Sine Wave for coils built with 0.50” OD tubes and aluminum, copper, and cupro- nickel, carbon steel and stainless steel; 0 .0095” +/- 5% for aluminum, copper, carbon Expansion shall not decrease the tube wall thickness. Coils shall be manufactured using

Aluminum Sheeting, Aluminum Foil Sheet - All Foils,

All Foils is a top supplier of aluminum sheeting products, specifically aluminum sheet. We carry a variety of aluminum sheet alloys from 1000 to 8000 Series. Each specific aluminum sheet alloy has varying elements that affect properties such as: tensile strength,

General Products Catalog -

ASTM specifications. Standard 5/8\" OD tube wall thickness is 0.020 inches, except Type WR and WRC coils, which use 0.025 inch wall. Standard 1\" OD tube wall thickness is 0.035 inches. Heavier wall tubing is available. Copper-nickel, aluminum, stainless steel

Cold Rolled Sheet Coil | Alliance

Alliance Steel offers a variety of cold rolled steel sheet and coil products and value-added services to meet customer needs. Alliance Steel’s cold rolled steel service capabilities include slitting, shearing, blanking, leveling, degreasing and brushing and metallurgical support.. Cold rolled steel is rolled at room temperature, below its recrystallization temperature, which enables better

RollingAluminum: FromtheMine

All Aluminum Association published standards, data, specifications and other technical materials are reviewed and revised, reaffirmed or withdrawn on a periodic basis. Users are advised to contact The Aluminum Association to ascertain whether the information in this publication has been superseded in the interim between publication and proposed

RESISTANCE OF

If we hold the winding length fixed, say at 17.88 inches, then the 1000 ft of aluminum wire will fit on a coil of 624 turns and 6.121 inches diameter. The inductance is now 17,670 µH, larger but still less than that of the copper coil. The aluminum coil has more resistance and less inductance than the copper coil, both

Al Marwan Building Materials Trading

Specification: ASTM A653 / A653M Zink Coating : 90 to 275 GMS Thickness : 0.3 mm to 3.8 MM Coil Weight : Approx 4 to 5 MT M S PLATE (HR SHEETS ) Specification: ST-37-2, A-36/ SS 400 / S 275 JR Dimention : 1220 x 2440 / 1500 x 6000 /2000 x 6000 / 2500 x 12000/ 3050 x 12000 / 2500 x 10000 Thickness : 1.2 mm to 100 mm (1220x2440) 3.0 mm to 11.7 mm

Aluminum Tubing |

Choose from our selection of multipurpose 6061 aluminum round tubes, general purpose aluminum tubing, high-strength 2024 aluminum tubes, and more. In stock and ready to

Standoffs Sign-Mounting Projects | 1.25\" X

These aluminum standoffs are great for mounting heavier materials. The sign shown in the picture at left is 0.75\" Corian, though it may well be actual stone due to its heavy weight. The aluminum standoffs not only support the weight of the material, but also accent the overall

Home - United

About United Aluminum. United Aluminum offers over 100 years of experience tailoring Custom Rolled ® Aluminum Coil to meet your most demanding specifications. We provide any size order, to any specification, in a wide variety of alloy and tempers, and shipped on-time,

Strip Coil | Cold Rolled | .0003″ – .188″ | 165+ Alloys

Thickness: .004″ – .062″ (0.102 – 1.575mm) Broken Corner is also available . Width: 3.50″ max (89mm max) Thickness: .062″ – .125″ (0.158mm – 3.175mm) Annealing. Stainless steel coil can be annealed under various atmospheres with a wide range of capabilities, from full anneal to stress

Aluminium Embossed Sheet,Stucco Embossed Aluminum Sheet

02) Aluminum thickness: 0.25mm2.0mm 03) Aluminum standard width: 1200mm Max width: 1500mm The embossed oxidized panel is beautiful, with thickness from 0.25mm to 2.0mm, while the maximum width is 1500mm, after pattern embossed, the thickness could be 0.08 to 0.25mm

INDUSTRIAL JACKETING - Johns

0.024” thick 3.2.1.5 Deep Corrugated Aluminum Sheet 3.2.1.5.1 Properties: Bare or painted surface, 3105/3003 alloy, H14 or H12 temper, 3 mil polyfilm moisture barrier 3.2.1.5.2 Classification: Type I or II, Grade 1 or 2, Class A, 0.016-0.040” thick 3.2.1.6 Box Rib Aluminum Sheet

Residential Carrier Fan Coil Units 1.5 To 3 Ton | Carrier

1.5 - 3 Ton Residential Fan Coil Variable Speed Multipoise (Aluminum Coil) 1.5 - 3 Ton Residential Fan Coil Variable Speed Multipoise (Aluminum Coil) Condensate fittings relocated away from turbulent airflow patterns at the blower entrance for improved condensate control

Al Marwan Building Materials Trading

Specification: ASTM A653 / A653M Zink Coating : 90 to 275 GMS Thickness : 0.3 mm to 3.8 MM Coil Weight : Approx 4 to 5 MT M S PLATE (HR SHEETS ) Specification: ST-37-2, A-36/ SS 400 / S 275 JR Dimention : 1220 x 2440 / 1500 x 6000 /2000 x 6000 / 2500 x 12000/ 3050 x 12000 / 2500 x 10000 Thickness : 1.2 mm to 100 mm (1220x2440) 3.0 mm to 11.7 mm

Titus HVAC | Engineering Innovative Air Distribution

Radial Air Pattern, Steel Perforated Face and Steel Backpan for Critical Environment Applications Architectural Linear Diffuser, Aluminum, 1.5\" Slot. 4FL. Aluminum Return Grille, 45 Degree Deflection, 1/2\" blade spacing, Blades Parallel to Long Dimension. FBC. IAQ liner insulation 1/2 1 inch thickness. FMA. Factory Mounting

MetalsDepot® - 6061 Aluminum Sheet | 6061 Aluminum

6061 Aluminum Sheet Plate offers a combination of higher strength, good corrosion resistance and mability making the 6061 grade the most widely used aluminum sheet and plate grade available for all types of fabrication projects.The general purpose 6061 Aluminum Sheet Plate is heat treatable, resists cracking due to stress, and is easy to weld and machine, but limited on formability

MetalsDepot® - Perforated Aluminum

Perforated Aluminum Sheet is a sheet product that has been punched with a wide variety of hole sizes and patterns providing an aesthetic appeal.Perforated Aluminum Sheet offers savings in weight, passage of light, liquid, sound and air, while providing a decorative or ornamental

Alumet Supply - Aluminum Sheet, Coil And ACM

Alumet Supply is a metal service center specializing in aluminum sheet and coil. We specialize in painted, anodized and mill finish aluminum. Alumet Supply offers cut-to-length, slitting, blanking and shearing. We provide custom colors and custom sizes. We also have our own brand of ACM panels, called

PAC-150 Standing Seam Metal Roofing - Petersen

PAC-150 roofing panels feature a 1.5” leg height which requires mechanical field seaming to either 90° or 180° depending on the project’s uplift requirements. Panels have a concealed-fastener clip designed to allow for maximum design flexibility. For further details, please contact a Petersen

3003 Aluminum Coil Factory Supplied Top Quality

3003 aluminum coil is a metal product used for flying shearing after casting and rolling process of casting and rolling machine. Widely used in electronics, packaging, construction, machinery and other industries. Chemical Composition (Chemical Composition Limits wt%): Cu 0.05-0.2 . Si 0.6 . Fe 0.7 . Mn 1.0-1.5 . Mg / Zn 0.1 . Cr / Ti / Pb.Bi

Aluminum Channel -

Aluminum Channel. Aluminum channel is an excellent choice for applications that require strength and corrosion resistance. Ryerson\'s aluminum channel stock is available in both 6061 and 6063 alloys. We also supply aluminum channel extrusions in the same grades. Our 6061 channel comes in either American Standard or Aluminum

#2A Stock Hot Water Duct Coils - USA Coil

1.50\" m.p.t. or 1 5/8\" 2.00\" m.p.t. or 2 1/8\" coil tubes - all coils have 5/8\" o.d. copper tubes with .020\" wall and staggered tube pattern fins - all coils have .006\" thick die formed plate-type aluminum fins connections - supply and return connections are available in copper m.p.t. or

Checkered Steel Floor Plate | Hansen Steel | ECW Base

Aluminum; Our standard checkered plate ranges from 14 gauge to 1 inch thick, 48 inches to 96 inches wide, and lengths up to 25 feet long with custom cut lengths available. By holding all different sizes of aluminum and steel floor plate in stock and ready to go, you can oftentimes get

Inquiry

For all inquiries, please fill in the form below (Name/Email/Message are required) to send us a brief message, and we will get back to you as soon as possible.

CBD, ZHENGHZOU, HENAN CHINA

+86 18100321580

Your message has been sent. Thank you!